Ever since I started doing projects with a Raspberry Pi, people have asked me to use it to make a media center. That's just a little computer that you hook…
Read More
Not too long ago, I made a table top called Quarto as a late (like 7 years late) wedding present for a friend. During that process, I started thinking about…
Read More
About two years ago, a good friend of mine renovated his kitchen (as in COMPLETELY ripped it out and started over, to the floor joists). I helped him a bit…
Read More
I first cut two pieces of thin material to 24"x48". One of these sheet was 1/8" melamine, which will act as the table surface. I cut two pieces of 1x6…
Read More
I measured out three marks on two sides of a scrap of 3/4" plywood. ..I put down some blue tape to reduce chip out, then used a straight edge to…
Read More
Four kids (three in school) means LOTS OF PAPER. Lots of pictures, report cards, notes, etc that need a place to go. We almost grabbed another plastic hanging file box…
Read More
Quarto is a game that I've played for many years. It's a fun and simple strategy game that gets more complicated as you learn it more and more. The pieces…
Read More
One of the absolute most common questions I get in email and comments is "what tools do I need to get started?" That's actually not a very easy question to…
Read More
In the back area of my Land Cruiser, I took conservative measurements. I wanted to be absolutely sure that it fit. I transferred the measurements to a sheet of 1/2"…
Read More
The internal frame was made out of 2x4. I cut two long pieces for the front and back as well as three shorter pieces. I predrilled and countersunk holes in…
Read More