In this episode of Bits, I'm quickly going over edge banding. Edge Banding is is practice of use thin pieces of wood to cover up the exposed edges of plywood,...
Listen Now
In my boys’ room, I have done a lot of work. We’ve added a closet, a climbing wall, some beds, a dresser, and custom flooring. This week, I’m going to…
The guys are comparing their first jobs, streaming services, and answering a big list of YOUR Pro v. Con topics! Also, the guys are running their half marathon this weekend and Josh discusses the butterflies he has leading up to the race.
If you plan on getting into 3d printing, you must understand that there is a balance between print fidelity and print time. Most printers can print objects at really fine...
Listen Now
I’ve always been intrigued by big neon signs. Obviously, I’m no glass blower and this is no venue to be messing around with electrified noble gasses. Instead, I’m going to…
In this episode of Bits, we address the differences between two different brains for electronic projects, Arduino micro controllers and Raspberry Pi micro computers. I get asked a lot about...
Listen Now
Netflix is about to release the third season of Daredevil and we can’t wait! I used to read Daredevil comics and I love the new show, so I jumped at…
If you are interested in getting into 3d printing, you may be confused by all of the available filaments. There are many types of filaments, and in this episode of...
Listen Now
In this episode of Bits, Josh comes from behind the camera to explain the process of taking rough lumber and transforming it into perfectly squared stock. This process is traditionally...
Listen Now
We get asked a lot about recommendations for 3d printers. Most of the time, the question comes from people who haven't yet gotten into 3d printing and they want to...
Listen Now