After making the silicone mold for the epoxy neon sign, I wondered if I could make a cool 3d printed design inside of its own mold? I was thinking about…
Read More
In this episode of Bits, I'm quickly going over edge banding. Edge Banding is is practice of use thin pieces of wood to cover up the exposed edges of plywood,…
Read More
In my boys' room, I have done a lot of work. We've added a closet, a climbing wall, some beds, a dresser, and custom flooring. This week, I'm going to…
Read More
If you plan on getting into 3d printing, you must understand that there is a balance between print fidelity and print time. Most printers can print objects at really fine…
Read More
I've always been intrigued by big neon signs. Obviously, I'm no glass blower and this is no venue to be messing around with electrified noble gasses. Instead, I'm going to…
Read More
In this episode of Bits, we address the differences between two different brains for electronic projects, Arduino micro controllers and Raspberry Pi micro computers. I get asked a lot about…
Read More
Netflix is about to release the third season of Daredevil and we can't wait! I used to read Daredevil comics and I love the new show, so I jumped at…
Read More
If you are interested in getting into 3d printing, you may be confused by all of the available filaments. There are many types of filaments, and in this episode of…
Read More
In this episode of Bits, Josh comes from behind the camera to explain the process of taking rough lumber and transforming it into perfectly squared stock. This process is traditionally…
Read More
A while back I made a steel and cedar outdoor chair. My wife really liked that design and asked for a matching outdoor table. Because it will be placed in…
Read More